DSKR rack high frequency finish milling rack
- Product Classification:Hardened rack
- product labeling:straight grind manufacturer finish frequency high guide processing
- Number of visits:Already 1532Customer
Contact us:18626363628
Product introduction
Installation of DSKR rack:
1. Place the rack on the bed and install the threaded holes in alignment.
2. Clamping the contact surface between rack and bed by fixture, and the fixed position should be as close as possible to the rack mounting hole.
3. Put in the hexagonal socket head bolt with strength of 12.9. Firstly, lock the recommended value of torsion with 10% screw, not lock it completely。
4. Adjust the fixture position properly so that the rack and the support surface of the bed fully fit.
1. Place the rack on the bed and install the threaded holes in alignment.
2. Clamping the contact surface between rack and bed by fixture, and the fixed position should be as close as possible to the rack mounting hole.
3. Put in the hexagonal socket head bolt with strength of 12.9. Firstly, lock the recommended value of torsion with 10% screw, not lock it completely。
4. Adjust the fixture position properly so that the rack and the support surface of the bed fully fit.
Previous page:DSKR rack high frequency finish milling rack
next page:没有了…
Urban Distribution
Recommended products
Popular articles
popular articles
1The cutting-edge gear processing technology, brilliant fight!
2019-10-09
2Development Trend of Gear Processing Technology and Equipment
2019-10-09
3Some Key Points to Be Noticed in Gear Processing and Manufacturing
2019-10-09
4Why do we always want to do Gear processing, but we cant do it well?
2019-10-09
5Development Trend of Gear Processing Technology and Equipment
2019-10-09
6Introduction of Gear Processing
2019-10-09
7Common Defects and Solutions in Gear Hobbing
2019-10-09
8Several Key Technologies in Rack Grinding Machine
2019-10-09